Dryer Vent Cleaning in Houston - Flat Price, Airflow Proven on the Day

Fast, Reliable Dryer Vent Cleaning Across Houston

Dryer vent cleaning in Houston typically runs $149-$289 for a standard single-family home, with full inspections and camera verification included in that range. Most jobs take 60-90 minutes, and we dispatch from our Houston office to neighborhoods from The Heights to Clear Lake without routing you through a call center in another state. You can reach our local scheduling desk at (346) 423-3631; a live person answers, and we’ll put a written price in your hand before any work starts.

Call (346) 423-3631

We’ve been cleaning ductwork and dryer vents across this market since 2013, and Houston’s conditions are genuinely different from Dallas, San Antonio, or Austin. The Gulf humidity here doesn’t just make you uncomfortable - it changes how lint behaves inside your vent run, how moisture moves through your laundry space, and why some “clean” vents clog again within months. Our crews know the difference because we’ve documented it, run by run, with before-and-after photos on every job.

Why CleanRun Air Duct Cleaning Spring Is Houston’s Preferred Dryer Vent Cleaning Company

We’re independently owned and operated under the Haven Standard, not a franchise network, and every Houston job is backed by our 365-Day Done Right Promise in writing. If the work isn’t right, we make it right. No manager approval needed. That’s Haven Standard Clause 1, and it’s printed on every scope sheet we deliver.

Our technicians are background-checked, uniformed, and identified by name before arrival - Haven Standard Clause 3: Verified Crews. They carry professional-grade equipment from Nikro, Abatement Technologies, and Honeywell, brands you can look up independently before you agree to any price. We don’t expect trust; we document everything.

The photo record matters here more than in drier markets. In Houston, a vent can look clear at the termination cap while harboring matted, Gulf-damp lint two feet inside the run. Our standard deliverable includes before-and-after images from inside every accessible section, so you see what was actually removed, not just what we claim.

We also offer a Free Second Opinion on any written estimate. Bring us a competitor’s quote - we’ll put our number next to it in writing, line item by line item, and explain where the scopes differ. No pressure, no coupon theatrics.

Our Dryer Vent Cleaning Services in Houston

Dryer Vent Inspection

Every Dryer Vent Cleaning job we perform in Houston starts with a camera inspection of the full run, from the dryer’s transition duct to the exterior termination. In neighborhoods like Meyerland and Braeswood, where Hurricane Harvey flood sediment still turns up in ductwork years later, this inspection isn’t optional - it’s how we distinguish surface lint from entrenched debris that wicked into the run through cap breaches or disconnected collars. We document what the camera shows, show it to you before quoting, and include those images in your job record.

Our inspection also identifies vent terminations that pull humid attic air backward. Because Houston’s Gulf Coast dew points sit above 75°F for months and attics stay hot, dryer vents that terminate under a low soffit or into a screened crawlspace opening draw that wet air backward, and lint mats down before it ever clogs the run. This pattern shows up far less in drier Texas metros. We flag it, photograph it, and explain your rerouting options if needed.

Vent Cleaning - Source Removal, Not Fogging

We perform mechanical agitation and negative-pressure extraction (high-suction vacuum collection while brushes disturb the debris) on every vent run. In Houston’s humidity, “sanitizing fog” is a common upsell that does nothing to remove the source material. Fogging doesn’t extract lint. It deposits a chemical film on top of it. We don’t sell it, and we don’t recommend paying for it.

What we do: Rotobrush and Nikro agitation tools sized to your duct diameter, paired with vacuum collection that pulls dislodged material out of the run rather than pushing it deeper. In Clear Lake and Pearland homes with flex runs through 140°F+ attics, we often find sagging low points where lint and microbial growth have collected for years. The camera shows it. The brushes reach it. The vacuum removes it. Then we photograph the clear passage and deliver those images to you.

Lint Removal - What’s Actually in There

Houston lint isn’t dry and fluffy. The Gulf humidity mats it down, compresses it against duct walls, and in flood-affected zip codes it mixes with fine sediment that wicks into the run through compromised caps or disconnected joints. In a 1990s slab home in Clear Lake, we pulled the outside vent cap and found the flapper glued shut with a mat of Gulf-damp lint, so the customer’s dryer was cycling hot, humid air straight back into the laundry closet. After rerouting the run to a proper wall cap, our tech ran a camera inspection the full length, cleared the buildup with agitation tools, and verified the lint pathway was clear end to end.

That’s the difference between cleaning the lint trap - which you should do every load - and cleaning the vent run, which requires tools, access, and documentation.

Vent Rerouting and Cap Replacement

Some Houston homes, especially 1970s-1990s builds in Katy, Sugar Land, and Friendswood, were originally vented through the roof or into a soffit that seemed fine on the blueprint but fails in practice. Roof terminations collect lint at vertical rises that agitation tools can’t always clear completely. Soffit terminations in humid climates pull attic air backward. We reroute to wall caps with proper clearances, sealed collars, and flappers that actually close - not the cheap louvered caps that stick open after one Houston summer.

We also install bird guards and replace deteriorated caps as part of the scope when needed. Every reroute gets a written price before we cut anything, and every completed run gets the same photo documentation as a standard cleaning.

Before

After

Trusted Brands We Service in Houston

Our equipment roster includes Nikro portable HEPA vacuums, Abatement Technologies negative-air machines, and Honeywell airflow verification meters - tools we name specifically so you can research them before we arrive. We don’t use shop vacs with duct-tape adapters, and we don’t send technicians with equipment they can’t explain. For vent reroutes and cap replacements, we stock standard termination hardware and collar fittings matched to Houston’s common duct diameters, so most jobs finish in one visit without waiting on parts. If your system uses an Aprilaire or Guardsman component, we service those too, and we carry the documentation to prove it.

Common Dryer Vent Cleaning Problems We See in Houston Homes

• Gulf-damp lint matting. Houston’s humidity compresses lint into dense, damp sheets that cling to duct walls and resist ordinary airflow. A dryer running longer cycles, hotter surfaces, and higher energy bills is often the first sign. Our agitation tools break this material free; our vacuum extracts it; our camera confirms it’s gone.
• Harvey-era sediment in bayou-corridor zips. Technicians working Meyerland, Braeswood, and Brays Bayou-corridor neighborhoods routinely pull registers and find Hurricane Harvey (2017) sediment and mold still entrenched in ductwork years later. Homeowners dried out floors and drywall but never addressed the attic or under-slab duct sections that wicked floodwater. It’s a known failure pattern specific to Houston’s most repeatedly flooded zip codes, and it shows up in vent terminations as well as main ducts.
• Stuck or leaking vent caps. Houston’s humidity warps plastic flappers, corrodes metal hinges, and leaves caps stuck open or sealed shut. An open cap lets rain-driven moisture and attic air back into the run; a stuck-shut cap traps heat and humidity in the laundry space. We replace with corrosion-resistant hardware rated for coastal exposure.
• Sagging flex runs in unconditioned attics. Houston’s rapid suburban buildout from the late 1970s through the 2000s produced enormous tracts of slab-foundation homes where flexible ductwork was routed through attics that routinely reach 140°F+ in summer. Over time these flex runs sag, disconnect at collars, and accumulate debris and microbial growth at their low points. We identify these failures during inspection and quote repair before cleaning a run that’s structurally compromised.

Pricing for Dryer Vent Cleaning in Houston, TX

We Also Serve Cities Near Houston

Our crews dispatch from the Houston office to Galena Park, Humble, Spring, and Tomball with the same equipment, the same written pricing, and the same photo documentation standard. If you’re in these areas, you get the same scope sheet, the same 365-Day Done Right Promise, and the same live-person scheduling - no routing to a different call center or subcontractor network.

FAQs - Dryer Vent Cleaning in Houston