Whole-system duct and dryer vent check with before-and-after photos - you see exactly what came out of your vents
That "$99 whole-house special" is a bait ad - the real number appears once they are in your hallway, or the "clean" is a shop-vac at the register. We photograph the inside of your ducts before and after instead.
Before
After
Before
After
Before
AfterLennox Air Duct Cleaning in Aldine, TX | CleanRun Air Duct Cleaning Spring
Air Duct Cleaning in Aldine for independent Lennox work typically runs $280-$450 for a full system, with return-duct-only work starting around $180. What makes our Lennox work here different is simple: we’ve cleaned ducts in Aldine’s flood-impacted slab homes since 2013, and we know that a Lennox system in a 1970s ranch near Greens Bayou faces entirely different contamination than the same model sitting on a pier-and-beam foundation in Spring. We carry OEM-compatible Lennox parts and stock sealed metal duct and flex runs for same-day replacement when fiberglass duct board is too far gone. Call (346) 423-3631 for a written estimate before any work starts.
Why Aldine Residents Choose Us for Lennox Service
We’ve worked on Lennox equipment in Aldine long enough to recognize the patterns. The Merit Series condenser paired with original fiberglass duct board in a 1980s tract home off Aldine Mail Route. The Elite Series variable-speed blower straining against a return duct that’s never been cleaned since installation. The Dave Lennox Signature Collection running beautifully while its flex duct runs disintegrate in a 155°F attic.
Tomas Reyes, our owner, grew up in the Bronx and learned the trade at Bronx Community College before spending the better part of two decades on Texas ductwork. He’s logged serious hours near Gleannloch Farms, where older construction and clay-heavy soil push surprising debris loads into return air plenums. Tomas pulls camera footage before quoting anything. The camera doesn’t negotiate. What it shows is what you get - a documented photo record of every duct run, before and after, included standard on every job since our first call in 2013.
We’re an independent Lennox service provider, not a manufacturer-authorized dealer. That means no corporate service tiers, no mandated parts markups, and no incentive to sell you a new system when your ducts need sealing. We source OEM Lennox components for critical parts like blower motors and evaporator coils, and we use high-quality aftermarket duct sealing and insulation that meets or exceeds OEM spec. Every price is written and agreed before a panel comes off, under Haven Standard Clause 1. Every technician is background-checked, uniformed, and identified by name before arrival - Haven Standard Clause 3: Verified Crews.
Common Lennox Air Duct Cleaning Problems We Solve in Aldine
- Fiberglass duct board delamination in post-Harvey homes. Lennox systems from the 1980s-90s often used fiberglass duct board that traps flood silt after inundation events. In Aldine, where Hurricane Harvey sent water through slab-on-grade returns, we’ve pulled grilles to find dried silt and active mold matted against the board. The material delaminates, and no amount of surface cleaning restores its integrity.
- Flex duct liner tears from attic heat exposure. Lennox flex duct runs in Aldine’s unconditioned attics degrade at the 150°F temperatures we measure routinely in July and August. The liner tears, the insulation compresses, and the duct starts pulling humid Gulf air directly into the supply stream. Your cooling load spikes. Your energy bill follows.
- Evaporator coil corrosion from leaky return ducts. Lennox air handlers in Aldine fight constant humidity. When return ducts leak - common in original slab-home installations with undersized returns - the evaporator coil corrodes and grows biological restriction. Airflow drops. The coil freezes. The homeowner calls for “refrigerant” when the real problem is duct leakage.
- Blower motor overwork from dirty, undersized returns. Older Lennox units in Aldine’s 1960s-1980s housing stock were frequently installed with return ducts sized for smaller equipment. Decades of debris accumulation narrows them further. The blower motor overworks, runs hot, and fails prematurely. We see this on Merit Series and older builder-grade units regularly.
- Supply register boot condensation and mold. In Aldine’s humidity corridor, cold supply air hitting a poorly sealed register boot in a hot wall cavity causes condensation. Lennox systems running 11 months a year create constant moisture. Mold follows. Homeowners smell it before they see it.
BeforeAfterLennox Service in Aldine: What Local Conditions Mean for Your Equipment
Aldine sits in one of the most flood-prone corridors of Harris County, bisected by Greens Bayou tributaries, and the older 1960s-1980s slab-on-grade ranch homes that dominate the area were disproportionately affected by Hurricane Harvey’s 2017 inundation. When floodwater enters a home’s air handler or low-lying return plenums, ductwork becomes a primary site for mold colonization - making post-flood duct remediation a persistent, ongoing need here in a way that sets Aldine apart from higher-elevation Houston suburbs.
Here’s the specific problem for Lennox owners: Aldine’s unincorporated status historically meant fewer required duct inspections after flooding, so many Lennox systems here still have original fiberglass duct board that was never remediated after Hurricane Harvey. That contamination keeps recirculating. We’ve cleaned Lennox systems in Aldine where the homeowner replaced drywall, flooring, even cabinetry - but never touched the ductwork, skipping our Dryer Vent Cleaning in Aldine and the rest of the HVAC. The camera showed dried flood silt and black mold matted against fiberglass duct board that had been blowing spores through the house for six years. This is unlike higher-elevation Houston suburbs where floodwaters never reached the HVAC system, and it’s why our Aldine Lennox calls frequently involve full duct replacement rather than cleaning alone.
In the Greens Bayou area near Aldine Mail Route, we were called to a 1970s ranch with a Lennox Elite Series system and a musty smell. When we pulled the return grille, we found dried flood silt and black mold matted on the original fiberglass duct board. After a full system cleaning, we replaced the contaminated duct board with sealed metal duct and installed new flex runs, restoring clean airflow and eliminating the odor.
Lennox Models & Products We Service in Aldine
We clean, seal, and restore duct systems on the full Lennox residential lineup: Lennox sales & service covers Merit Series units like the 14ACX and ML14XC1 - common in Aldine’s 1990s-2000s construction; Elite Series variable-speed systems including the EL16XC1 and EL296V; and the Dave Lennox Signature Collection (SL280V, XC21) found in higher-end builds near newer Aldine infill. We also work on older Lennox builder-grade and CompleteHeat units, frequently original equipment in 1960s-1980s tract homes.
For critical components - blower motors, evaporator coils, control boards - we source OEM Lennox parts when available. For duct sealing, flex replacement, and insulation, we use aftermarket materials that meet or exceed OEM specification. Our trucks carry sealed metal duct, flex runs, and mastic sealant for same-day replacement in Aldine, so we’re not making two trips while your system sits open. If your Lennox is 15+ years old with flood-related duct contamination, we’ll give honest repair-vs-replace guidance in writing, not a sales pitch.
Lennox Service Pricing in Aldine
Our Lennox air duct cleaning pricing in Aldine follows Haven Standard Clause 1: one flat price per system, agreed in writing before work starts. No per-vent pricing. No teaser coupons that balloon once the truck arrives.
| Service | Price Range |
|---|---|
| Full system cleaning (supply + return ducts, registers, grilles) | $280 - $450 |
| Return duct cleaning only | $180 - $260 |
| Duct sealing (Aeroseal or manual mastic) | $400 - $750 |
| Fiberglass duct board replacement with sealed metal | $600 - $1,200 |
| Flex duct run replacement (per run) | $150 - $300 |
What drives cost: system accessibility (crawl space vs. attic), contamination severity, and whether we’re cleaning or replacing materials. A free estimate includes camera inspection of accessible duct runs, written scope, and written price. Every job concludes with a Documented Photo Record - inside every run, before and after - delivered as part of your standard job record. Call (346) 423-3631 for an exact quote; estimates are free.
Serving Aldine, TX - Our Local Coverage Area
We’re based in the Aldine area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Lennox Air Duct Cleaning in Aldine
Aldine’s combination of flood-prone slab construction, unincorporated status that historically skipped post-flood duct inspections, and 11-month AC runtime in Gulf humidity creates perfect mold conditions inside original fiberglass duct board. Higher-elevation suburbs like The Woodlands never had floodwater in returns. Many Aldine Lennox systems are still running contaminated board from 2017. Call (346) 423-3631 and we’ll show you what’s inside with the camera before quoting anything.
Surface cleaning works when the fiberglass is intact and the contamination is recent dust and debris. Once flood silt has penetrated the board or mold has rooted into the binder, cleaning won’t restore it - we replace with sealed metal duct or new flex runs. We make that call with camera evidence, not guesswork, and we show you the footage before you decide. Call (346) 423-3631 for a free inspection.
Every 3-5 years for standard dust accumulation in Aldine’s humidity. If your home flooded during Harvey or has original fiberglass duct board, we recommend annual inspection and cleaning until the flood-impacted materials are replaced. The 365-Day Done Right Promise covers our work if conditions return. Call (346) 423-3631 to schedule.
Uneven cooling between rooms, musty smells when the AC cycles on, humidity that won’t drop below 60% despite the system running, and energy bills climbing without rate changes. In Aldine’s slab homes, we frequently find disconnected flex runs in attics and corroded register boots - both pull humid attic air into your supply. We verify with pressure testing and camera inspection, then seal with mastic or Aeroseal.
Yes. We’re an independent service provider with hands-on experience across all major residential brands. Our Lennox expertise is deep - we know the specific failure modes of Merit, Elite, and Signature Series equipment in Aldine conditions - but our technicians are equally trained on Trane, Carrier, Goodman, and others. Aldine service area coverage applies regardless of brand.
Service Areas Near Aldine
We run Lennox service calls throughout the Aldine area and surrounding communities. Our crews are regularly in Lennox service in Spring, including the Gleannloch Farms area where older construction and clay soil create unique return plenum challenges. We also cover Lennox service in Humble, The Woodlands, Atascocita, and Tomball. Each area has its own housing stock and ductwork patterns - we adjust our approach to what we find, not to a single template.
Book Your Lennox Service in Aldine Today
Call (346) 423-3631 to speak with a live person - no automated queue, no “leave a message.” We’ll schedule a free estimate, send a background-checked, uniformed technician identified by name before arrival, and deliver a written price before any work starts. Every job includes the Documented Photo Record and the 365-Day Done Right Promise, backed in writing. If you’ve got a competitor’s quote, bring it - we offer a Free Second Opinion, our number next to theirs, no obligation.
Written by Tomas Reyes, Owner at CleanRun Air Duct Cleaning Spring, serving Aldine since 2013.