Whole-system duct and dryer vent check with before-and-after photos - you see exactly what came out of your vents
That "$99 whole-house special" is a bait ad - the real number appears once they are in your hallway, or the "clean" is a shop-vac at the register. We photograph the inside of your ducts before and after instead.
Before
After
Before
After
Before
AfterTrane Air Duct Cleaning in Aldine, TX | CleanRun Air Duct Cleaning Spring
Trane air duct cleaning in Aldine typically runs $380-$620 for a complete residential system, with post-flood remediation jobs climbing toward $850 when mold and silt removal are involved. We’re Trane specialists and an independent service provider, not manufacturer-affiliated, and we’ve learned that Aldine’s Harvey flood history changes what “clean ducts” actually means here. If your Trane system was running when Greens Bayou rose in 2017, or if your slab ranch has never had the ductwork opened, call us at (346) 423-3631 for a written estimate with a documented photo record.
Why Aldine Residents Choose Us for Trane Service
We’ve worked on Trane residential systems in the Houston area since 2013, and the equipment we see in Aldine has taught us something specific: Trane’s cabinet-to-plenum interfaces and fiberglass duct-board construction don’t forgive flood silt the way metal ductwork might. Our techs know the XR14 condensers, Hyperion air handlers, and cased coils common in Aldine’s 1960s-1980s ranch stock because we open them weekly.
Tomas Reyes, our owner, grew up in the Bronx and picked up his trade fundamentals at Bronx Community College before spending the better part of two decades on ductwork systems across Texas. He and the crew have logged serious hours in flood-impacted neighborhoods near Greens Bayou, where the older construction and clay-heavy soil push debris into return air plenums over time. Tomas pulls camera footage before quoting anything. The camera doesn’t negotiate.
We carry Trane OEM or exact-fit aftermarket parts for cabinets, coils, and controls when they’re cost-effective. We’re honest when a failed component on a 25-year-old Trane system isn’t worth chasing. Every job starts with a written price under Haven Standard Clause 1, and every duct run gets photographed before and after with our Rotobrush and Nikro equipment. That’s been our practice since our first job in 2013.
Common Trane Air Duct Cleaning Problems We Solve in Aldine
- Hyperion air-handler cabinet leaks pulling flood silt into the blower compartment. In Aldine’s slab ranches, the cabinet-to-plenum transition on Trane Hyperion units often gaps after decades of vibration and heat cycling. After Harvey, that opening let Greens Bayou silt and mold spores straight into the blower wheel and downstream fiberglass duct board. We seal the joint with mastic, clean the cabinet, and document the contamination with pre-work photos.
- Cased coils and TXV assemblies clogged with construction dust and dried flood debris. Aldine’s unincorporated history meant fewer required inspections during original construction, so Trane cased coils in these homes often sit behind layers of attic insulation fibers, drywall dust, and dried silt. During our 11-month cooling season, that buildup causes low airflow and coil freeze-up. We pull the coil, clean the fins, and check TXV superheat before reassembly.
- Flex duct liner degradation in 150°F attics sending fibers into Trane blower wheels. Original flex duct runs connected to Trane supply plenums in Aldine’s unconditioned attics degrade at the inner liner after decades of heat exposure. Those liner fibers wrap around the Trane blower wheel, reducing airflow and throwing debris onto the evaporator coil. We replace degraded flex with new insulated runs and clean the wheel and coil as one system.
- Condenser fin corrosion and compressor overheating from humid Gulf air and flood-zone debris. Trane outdoor condensers in the Greens Bayou corridor suffer coil fin corrosion because humid Gulf air and airborne debris pack the fins, especially when paired with a dirty indoor coil. We clean both sides of the system, not just the ducts, because a dirty condenser raises head pressure and shortens compressor life.
- Return-air grilles hiding active mold colonies from untreated post-Harvey moisture. Technicians working Aldine’s older neighborhoods regularly pull return-air grilles to find dried floodwater silt and active mold matted against original fiberglass duct board. The flooding was treated as a flooring and drywall problem, not an HVAC problem. That contamination has been recirculating for years. We treat it with documented before-and-after photography on every run.
BeforeAfterTrane Service in Aldine: What Local Conditions Mean for Your Equipment
Aldine sits in one of the most flood-prone corridors of Harris County, bisected by Greens Bayou tributaries, and the older 1960s-1980s slab-on-grade ranch homes that dominate the area were disproportionately affected by Hurricane Harvey’s 2017 inundation. When floodwater enters a home’s air handler or low-lying return plenums, ductwork becomes a primary site for mold colonization. That makes post-flood duct remediation a persistent, ongoing need here in a way that sets Aldine apart from higher-elevation Houston suburbs like Trane service in Spring or The Woodlands.
We’ve learned this on the job. On a Trane XR14 system in a 1970s slab ranch near the Greens Bayou tributaries in Aldine, we pulled the return grille and found original fiberglass duct board matted with dried flood silt and active mold, plus liner fibers wrapped around the Trane blower wheel. We performed Air Duct Cleaning in Aldine on the full system, sealed the leaking Trane air-handler cabinet joint with mastic, and replaced the degraded flex runs off the supply plenum. The homeowner said the musty smell that had lingered since Harvey finally cleared, and the Trane system stopped short-cycling on high head pressure.
That job is why we don’t treat Aldine Trane service as generic duct cleaning. The flood history here changes what’s actually inside the equipment, and it changes how we scope the work.
Trane Models & Products We Service in Aldine
We service the Trane equipment common in Aldine’s housing stock: XR series straight-cool and heat pump condensers (XR13, XR14, XR15), XB series entry-level condensers (XB13, XB14), and XV series variable-speed communicating systems (XV18, XV20i). We also work on Trane Hyperion air handlers and Trane cased coils and furnaces installed in 1990s-2000s tract homes throughout the Aldine service area.
Our parts approach is straightforward: Trane OEM or exact-fit aftermarket for cabinets, coils, and controls when available and cost-effective. We stock common Trane cabinet gaskets, coil fins, and TXV assemblies locally for faster Aldine turnaround. If a repair won’t restore safe airflow, we’ll recommend our Dryer Vent Cleaning in Aldine and full duct-system sealing rather than chasing parts on a system that’s already given its full service life. You get that recommendation in writing, with the reason, before any work starts.
Trane Service Pricing in Aldine
Our Aldine Trane duct cleaning pricing follows Haven Standard Clause 1: one flat price per system, agreed in writing before work starts. No per-vent pricing, no add-on surprises.
| Service | Typical Range in Aldine |
|---|---|
| Standard residential Trane duct cleaning (full system) | $380-$620 |
| Trane system with evaporator coil cleaning | $520-$780 |
| Post-flood remediation with mold/silt removal | $680-$850 |
| Duct sealing after cleaning (Aeroseal or mastic) | $450-$720 |
| Written estimate and camera inspection | Free |
What drives cost: system accessibility in Aldine’s low attic spaces, degree of contamination (flood silt removal adds labor), whether the Trane coil needs pulling, and how many flex duct runs need replacement versus cleaning. Every estimate includes the documented photo record of every duct run, delivered as a standard job record. Call (346) 423-3631 for your exact quote - estimates are free, and we put our number next to any competitor’s written estimate under our Free Second Opinion policy.
Serving Aldine, TX - Our Local Coverage Area
We’re based in the Aldine area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Trane Air Duct Cleaning in Aldine
Yes. We’ve opened Trane systems in Aldine six years post-Harvey and found active mold and dried silt still recirculating because the original cleanup addressed floors and walls, not the HVAC. The Trane Hyperion’s fiberglass duct board and cabinet-to-plenum gaps are especially vulnerable. If your home took water and the ductwork was never opened, we recommend a camera inspection. Call (346) 423-3631 to schedule - estimates are free.
Yes. We service Trane Hyperion air handlers, cased coils, and TXV assemblies regularly in Aldine’s older ranch homes. These are common in the 1990s-2000s construction stock here, and we carry OEM-compatible cabinet gaskets and coil hardware for faster turnaround. We’re independent and not Trane-authorized, but we know this equipment from repeated field work.
It shouldn’t, if the job was done correctly. Freeze-ups after cleaning usually mean the evaporator coil wasn’t cleaned with the ducts, or the TXV is clogged with debris that got disturbed during duct agitation. We clean the Trane coil, blower wheel, and ductwork as one system, then verify airflow and superheat before we leave. If another company’s cleaning caused a problem, we’ll diagnose it and put our repair quote in writing. Call (346) 423-3631 for a Free Second Opinion on any written estimate.
Yes. We use camera inspection through existing registers and the Trane air-handler access panel to document what’s inside each duct run before quoting. The camera shows silt buildup, mold colonies, and liner degradation without destructive access. That footage becomes part of your documented photo record, so you see what we see before deciding on the scope of work.
We use Trane OEM or exact-fit aftermarket parts when they’re available and cost-effective for the system’s remaining service life. On a 30-year-old Trane unit in Aldine, we’ll tell you honestly if a part replacement isn’t worth the investment compared to full system cleaning and sealing. That recommendation comes in writing, with the reasoning, before any work starts under Haven Standard Clause 1.
Service Areas Near Aldine
We serve Aldine and surrounding communities with the same documented approach: Trane service in Spring, including calls near Gleannloch Farms where older construction and clay-heavy soil push debris into return plenums; Trane service in Humble; The Woodlands; Atascocita; and Tomball. Every job gets the same written price, background-checked uniformed crew under Haven Standard Clause 3: Verified Crews, and full photo documentation.
Book Your Trane Service in Aldine Today
Call (346) 423-3631 to speak with a live person and schedule your free estimate. We’ll inspect your Trane system with a camera, put a flat price in writing before any work starts, and deliver a documented photo record of every duct run when the job is done. The 365-Day Done Right Promise applies to every Aldine home we serve.
Written by Tomas Reyes, Owner at CleanRun Air Duct Cleaning Spring, serving Aldine since 2013.